This page is only visible to admin users. Sorry!

This page is only visible to signed in users.

Contact <link>support@cycling74.com</link> if you believe you're seeing this page in error.

You don't have permission to view this page.

Activity

Billing History for { name }

Licenses

There was a problem removing the addon. Please try again.

Are you sure you would like to remove the <name>{addonName}</name> addon from your Max subscription? Your {addonName} addon license will remain active until the end of your current billing cycle.

{name} was successfully removed from your Max subscription.

Remove Addon

There was a problem resuming your subscription. Please try again.

Are you sure you would like to resume <name>{addonName}</name>? Your billing cycle will be reactivated and you will be billed as normal on {renewalDate}.

Your subscription has been successfully resumed.

Resume Subscription

There was a problem cancelling your subscription.

Are you sure you would like to cancel <name>{licenseName}</name>? Your license will remain active until <expiry>{expiryDate}</expiry>, at which point your subscription will expire and the license will be deactivated.

Your subscription has been successfully canceled.

Cancel Subscription

Next, start up the Max application and sign into your account (Help > User Account and Licenses).

Max has been successfully activated.

You must be signed into your account to activate Max.

Activate Max

Create a New Post

Edit Article

The list of what we're discovering about Max and our users grows each day. We tackle everything from hardware reviews to re-reading books from decades past.

Get the Latest on Max and our Community

Articles

Sign Out

Sign in to authorize License

Authorize Max

Filter by Format

Filter by Language

Find books related to learning Max.

Books About Max

Here are the artists and educators helping people get creative in Max

Meet Our Max Certified Trainers

Certified Trainers

{ firstName } { lastName } - Certified Trainer

There are no open positions at this time.

Please check your inbox for further instructions.

Forgot Password

Error

Success

Actions

Create Forum Topic

Edit Forum Topic

{category} Forum

There was an error submitting your details. Please try again.

Thank you for your submission! Someone will be in touch with you soon.

NFR / Industry Accomodations

Please make sure you use the link you received by email.

There was a problem retrieving your invitation.

Your account has been successfully created. To manage your institutional licenses, please go to <authLink>https://auth.cycling74.com</authLink> and sign in with your newly created account.

You must be signed out to view this page.

Create an Account

Find more details on our <link>Status Page</link>.

Under Maintenance

We are currently carrying out a scheduled maintenance of our website. Some functionality is temporarily unavailable. We appreciate your patience.

Name

Sort By

{ category } Packages

Share a Max Project

Edit Project

Image Notes

Important Notes

Max Projects come in all shapes and forms. Over the years, our users have shared over a thousand ideas and projects with us. We're proud to showcase them here.

Find Inspiration from other Max Users

Cycling '74 will review it within a week and may make minor edits before publishing it, so your project looks best and reads well in our project gallery.

Thank you for your submission! Your project is currently pending.

Account Recovery

Bundled

{ name } { version } Release Notes

There was a problem changing your password. Please try again.

You can now <link>log in</link> with your updated credentials.

Your password was changed successfully.

Reset Password

Your purchase has now been linked to this account. Next, start up the Max application and sign into your account (Help > User Account and Licenses).

Retrieve License

Type

Search the Cycling '74 forums and website

Search {query}

Please enter your educational details

Your Max for Live or Live Suite serial number is required for this purchase. <link>Need help finding your serial number?</link>

There was a problem updating your subscription. Please try again, or contact support@cycling74.com if the problem persists.

Cannot add RNBO

Confirm Subscription Addon

Thank you for your purchase

Thank you

Retrieving your order details, please wait...

Contact <link>support@cycling74.com</link> if you have questions/issues.

Couldn't sign in. Please check that your username/email and password are correct.

Sign in with your Cycling '74 account

There was a problem creating an account. Please try again.

Successfully created your user account! Please check your email for one last verification step.

Create a Cycling '74 account

Select a Product

Thank you! Your request has been successfully submitted to our support team. Please check your email.

There was an error sending your application. Please try again.

There was an error sending your request. Please try again.

By submitting this iLok request, you understand that you will be notified when an asset is deposited to your iLok.com account. After receiving that notification, you can transfer the asset to your iLok USB stick. Please be aware that all iLok requests are manually processed so it can take up to 48 hours to fulfill your request during normal business hours (Monday-Friday, 9am-5pm Pacific Time).

Important Information

Thank you! Your request has been successfully submitted.

Please note that we are no longer taking submissions for Tools and no longer supporting the Tools section, so you may run into broken files and URLs. You can contribute to the Cycling '74 Community by submitting a Package or using the forums instead.

Max Tools Archive

Edit Tutorial

Tutorials are an ideal way to accomplish a task, learn a new strategy or brush up on your skills. In addition to our in-app Examples, Tutorials and Help Files, you can find new ones here.

Explore the Online Tutorials

Tutorials

Thank you. Please start Max and sign in to use your license

Upgrade

Sign In

Your account requires verification. Please check your inbox, or <link>click here to send the verification email again</link> if you didn't receive it.

Unverified Account

Do you have an activation code?

Already own Max 8 and ready to authorize?

Trouble? Please email <link>support@cycling74.com</link> for help.

If you're new to Max, this is just for you.

Thanks for verifying your account!

You're one step closer to being part of the Cycling '74 Community.

Verify Your Cycling '74 Account

Failed to request a new verification e-mail: {message}

A verification email has been sent to { email }. Please check your inbox.

Can't find your verification e-mail or only have an expired one?

There was a problem verifying your email change. Please try again.

There was an error verifying your email address.

Your email address has been successfully verified. Thank you!

Verify Your Email Address

A user token is required to verify your email address. Please follow the link you received via email.

oshii

Seems like I can't get phasor to sync by resetting its phase.

What am I doing wrong? Can someone please explain, as I've spent hours and just don't get it: how the right inlet of phasor is supposed to work at all? (gen help file, unlike the rest of the Max help files, are very obscure to me)

gen-phasor-phase-sync-not-working

gen~ phasor phase sync not working?

Martin D

I'm using GenExpr for the first time, and I have a strange issue.

I have a function with three input parameters that should return the value of input 1 or 2 depending on the value of input 3. Returning the parameter variables directly causes the conditional return to never happen, but it does work if I reassign the inputs to a new variable and return that instead. 

Meaning I am able to get it to work, but I don't understand why this is, so I wanted to post here in case someone knows something or it's a bug. I haven't found anything similar mentioned in docs or other posts. FYI I'm working in Max For Live, but I've had no other issues that I know of. Thanks.

I'm working only in Max For Live so a video was faster. To the right is the value of [out3] of [gen~] in a different window. 

GenExpr - func w/ conditional returns fails to return input variable unless assigned to new variable

genexpr-func-w-conditional-returns-fails-to-return-input-variable-unless-assigned-to-new-variable

Massimiliano Cerioni

I needed to make an accurate latency test of my system, so I took inspiration from the old MSP latency test patch under 

 folder and built an alternative version in gen. There were a couple of active discussions 

, from which I took the threshold trick that Graham implemented.

I needed to make an accurate latency test of my system, so I took inspiration from the old MSP latency test patch under...

a-new-io-latency-test-patch-made-in-gen

A new IO latency test patch made in gen

sonicfusiondesignlab

I have tried the samples from the book called generating sounds and organizing time, however , I cannot find the mix and wrap objects ( probably more but I haven't tried them yet. How can I figure it out ? Thanks !

I have tried the samples from the book called generating sounds and organizing time, however , I cannot find the mix and wrap objects ( probably more but I haven't tried them yet. How can I figure it out ?  Thanks !

Hello 
I have tried the samples from the book called generating sounds and organizing time, however , I cannot find the mix and wrap ... 

about-the-mix-and-wrap-object

( I realized that I write a p patcher instead of gen patcher ) 

About the Mix and Wrap object

A simple implementation of the logistic map equation in gen~. Feel free to share your thoughts.

logistic-map-in-gen~

[history] is still there cause the previous version was a feedback loop, but it can be removed.

Logistic Map in Gen~

Ernest

When assigning polyphonic voices in codebox, additional control and external signal assignments are possible, because the internal pitch/gate/age data arrays and methods are editable. For example, the voice age is accessible for devices such as arpeggiators. Also, the exact manner of voice stealing, voice clear, and voice-count change are directly controllable.

This example patch shows stealing with corrected-least-recently used (CLRU) voice replacement. Upon overflow with a CLRU algorithm, new notes after overflow are less likely to truncate any playing voices that are gated off, but still in any envelope release phase. Internally, three separate pitch, gate, and voice-age arrays are ordered by voice number, and stored in a buffer~ object for external inspection and access.

As with the original poly object, positive integers on the first MIDI-pitch input create a MIDI note-on or note-off event, depending on the second input's MIDI-velocity value.

0 on the first input causes the object to issue GATE-OFF events for any playing voices, then resets the object's internal data.

It has four other enhancements, described below the screenshot

gen2.PNG

the allocator primes the age buffer, empties the others, and sets static variables to default values. VCNT is the maximum number of available voices (edit as desired) and NUMV is the number of active voices (default 0).

Data pch(257), vel(257), age(257);
History numv(0), vcnt(257);
if (in1 <=0){
    ...
    for (i=1; i<=vcnt; i+=1){
        vel.poke(0, i); 
        pch.poke(0, i);
        age.poke(i, i);
        numv = 0;
     }

 gen can only output one event for each input event, so multiple voice-off events for a single reset signal is not possible without enabling the metro . However, enabling the metro also prevents the gen object from receiving more than one input event in any metro interval. 

the allocator first checks to see if all voices are on for overflow handling. Then it increments the age of all voices by one and puts the new note, with age of 1, in the oldest slot. If the note is not found, aoff remains 0 and nothing happens.

if(in2 >0){
    for(i=1;i<=vcnt; i+=1){
        out3 = in2;
        out2 = in1;
        x = age.peek(i);
        if(x==vcnt){
            if(numv==vcnt){
                ...(//kslider fix code)...
                }
            }else{
                numv +=1;
            }
            age.poke(1, i);
            pch.poke(in1,i); 
            vel.poke(in2,i);
            out1 = i;
        }else{
            age.poke(x+1,i);
        }
    }
}

the allocator looks for a note with the same pitch. If found, it sets its age to the current number of voices, decrements numv, and shuffles older notes up in the age queue.

of (in2==0){
    for(i=1;i<=vcnt; i+=1){
        if(pch.peek(i) ==in1){
            aoff = age.peek(i);
            age.poke(numv, i);
            pch.poke(0,i);
            vel.poke(0,i);
            numv -=1;        
            out4 = 0;     //kb fix
            out3 = 0;     //vel 0
            out2 = in1;     //fr off
            out1 = i;    //voice off
        //    break;
        }
    }
    for(i=1;i<=vcnt; i+=1){
        x = age.peek(i);
        if(x>aoff && x<numv){
            age.poke(x+1);
        }
    }
}

Note, when the kslider object receives a note-off message while the user is pressing an on-screen note, it resends the last note-on event. While this could be useful for implementing aftertouch, currently the implementation filters out consecutive note-on events with the same pitch value using a History object called p0 to store the last received pitch:

 History p0;
 ... 
 if (in1 <= 0) {
        ...(reset routines)...  
 } else if (in1 != p0 && in2 >0) {
        ...(voice-on routines)...
        p0 = in1;
} else if (in2 == 0) {
       ..(voice off routines)...
       p0 = 0;
} 

Without the filter on consecutive note-on events with the same pitch, the kslider sets all the output voices to the same pitch while the mouse is clicked and dragged on it. With this filter, the user can click and drag on the kslider object to turn on multiple neighboring notes,. Whenever the voice capacity overflows, the replaced notes are immediately turned off on the kslider object. 

in the first two statements of a note-on event (also there is an mtof() conversion in the reset routine):

    ...     }else if (in1 != p0 && in2 >0) {

out3 = 1 -(in2/127);        //gate out 0-1

        out2 = mtof(in1);         //fc out, Hz

The allocator can contain multiple voices with the same pitch. 

Currently, NOTE-OFF messages turn off all voices with the same pitch. You can change this behavior by uncommenting the BREAK statement at the end of the note-off routine.

...
    }else if (in2 ==0) {
        ...
        // break;
    }

If a voice has already been stolen, note-off messages for are simply discarded.

, this implementation does not add and latency to voice-on events after overflow. If you overflow the voice capacity, then this example may create an audible click on the retriggered voice, which you are free to fix in gen.

When assigning polyphonic voices in codebox,  additional control and external signal  assignments are possible, because the internal pitch/gate/age data arrays and methods are editable. For example, the voice age is accessible for devices such as arpeggiators. Also, the exact manner of voice stealing, voice clear, and voice-count change are directly controllable.  

This example patch shows stealing with corrected-least-recently used (CLRU) voice replacement. Upon overflow with  a CLRU algorithm, new notes after overflow are less likely to truncate any playing voices that are gated off, but still in any envelope release phase.  Internally, three separate pitch, gate, and voice-age arrays are ordered by voice number,  and stored in a buffer~ object for external inspection and access. 

As with the original poly object, positive integers on the first MIDI-pitch input create a MIDI note-on or note-off event, depending on  the second input's MIDI-velocity value.

0 on the first input causes the object to issue GATE-OFF events for any playing voices, then resets the object's internal data.  

It has four other enhancements,  described below the screenshot

 Dynamic voice-count changing. A negative value on the first input sets the number of voices, for example, -64 sets the number of voices  to 64. after reset and GATE-OFF events for any playing voices.  When setting the number of voices with the first input, the  second input is ignored.  Note, if the voice count on other objects is higher, the GATE-OFF events can simply trigger a note-off event on other objects, allowing playing voice amplitudes to decay slowly. However, If lowering the voice count on other objects, some playing voices may click off.  

Direct kslider input: This gen implementation interfaces directly with a kslider object in poly mode. With the kslider object, velocities for note-on  events are 1 at the bottom and 127 at the top of the keyboard.  Therefore the current implementation subtracts velocities in the 1~127 range from 128, also scaling velocity values to 0-1  to gated output amplitude on the third output.  Then the MIDI note frequency (in Hz) is output on the second output, then  finally, the first output sends a voice number for the new voice-on or voice-off event.  Voice-off events are the same as voice-on events, except the third output has a value of 0. 

kslider fix, to turn off notes after voice overflow. On overflow, a fourth output sends the pitch for a MIDI note-off event just prior to the voice-on event, or 0 if there is no overflow. You can pass this value through a "SET $1 0" messagebox to create an input event for the kslider object. 

Connection to mc.gen~ inputs. To send the gen  outputs  to a mc.gen~ object's frequency and gate inputs, the example packs the voice, frequency,  and  gate outputs together, then uses a "SETVALUE $1 $2" message to set a voice's frequency, and a "SETVALUE $1 $3" message to set a voice's gate.  

On reset, the allocator primes the age buffer, empties the others, and sets static variables to default values. VCNT is the maximum number of available voices (edit as desired) and  NUMV is the number of active voices (default 0).   

Data pch(257), vel(257), age(257);
History numv(0), vcnt(257);
if (in1 <=0){
	...
	for (i=1; i<=vcnt; i+=1){
		vel.poke(0, i); 
		pch.poke(0, i);
		age.poke(i, i);
		numv = 0;
 	}

Note, gen  can  only output one event for each input event, so multiple voice-off events for a single reset signal is not possible without enabling the metro . However, enabling the metro also prevents the gen object from receiving more than one input event in any metro interval. 

On note-on events, the allocator first checks to see if all voices are on for overflow handling. Then it increments  the age of all voices by one and puts the new note, with age of 1, in the oldest slot.  If the note is not found, aoff remains 0 and nothing happens. 

if(in2 >0){
	for(i=1;i<=vcnt; i+=1){
		out3 = in2;
		out2 = in1;
		x = age.peek(i);
		if(x==vcnt){
			if(numv==vcnt){
				...(//kslider fix code)...
				}
			}else{
				numv +=1;
			}
			age.poke(1, i);
			pch.poke(in1,i); 
			vel.poke(in2,i);
			out1 = i;
		}else{
			age.poke(x+1,i);
		}
	}
}

On note-off events,  the allocator looks for a note with the same pitch. If found, it sets its age to the current number of voices, decrements numv, and shuffles older notes up in the age queue. 

Gen Forum