This page is only visible to admin users. Sorry!

This page is only visible to signed in users.

Contact <link>support@cycling74.com</link> if you believe you're seeing this page in error.

You don't have permission to view this page.

Activity

Billing History for { name }

Licenses

There was a problem removing the addon. Please try again.

Are you sure you would like to remove the <name>{addonName}</name> addon from your Max subscription? Your {addonName} addon license will remain active until the end of your current billing cycle.

{name} was successfully removed from your Max subscription.

Remove Addon

There was a problem resuming your subscription. Please try again.

Are you sure you would like to resume <name>{addonName}</name>? Your billing cycle will be reactivated and you will be billed as normal on {renewalDate}.

Your subscription has been successfully resumed.

Resume Subscription

There was a problem cancelling your subscription.

Are you sure you would like to cancel <name>{licenseName}</name>? Your license will remain active until <expiry>{expiryDate}</expiry>, at which point your subscription will expire and the license will be deactivated.

Your subscription has been successfully canceled.

Cancel Subscription

Next, start up the Max application and sign into your account (Help > User Account and Licenses).

Max has been successfully activated.

You must be signed into your account to activate Max.

Activate Max

Create a New Post

Edit Article

The list of what we're discovering about Max and our users grows each day. We tackle everything from hardware reviews to re-reading books from decades past.

Get the Latest on Max and our Community

Articles

Sign Out

Sign in to authorize License

Authorize Max

Filter by Format

Filter by Language

Find books related to learning Max.

Books About Max

Here are the artists and educators helping people get creative in Max

Meet Our Max Certified Trainers

Certified Trainers

{ firstName } { lastName } - Certified Trainer

There are no open positions at this time.

This website uses cookies.

Please check your inbox for further instructions.

Forgot Password

Error

Success

Actions

Create Forum Topic

Edit Forum Topic

{category} Forum

There was an error submitting your details. Please try again.

Thank you for your submission! Someone will be in touch with you soon.

NFR / Industry Accomodations

Please make sure you use the link you received by email.

There was a problem retrieving your invitation.

Your account has been successfully created. To manage your institutional licenses, please go to <authLink>https://auth.cycling74.com</authLink> and sign in with your newly created account.

You must be signed out to view this page.

Create an Account

Find more details on our <link>Status Page</link>.

Under Maintenance

We are currently carrying out a scheduled maintenance of our website. Some functionality is temporarily unavailable. We appreciate your patience.

Name

Sort By

{ category } Packages

Share a Max Project

Edit Project

Image Notes

Important Notes

Max Projects come in all shapes and forms. Over the years, our users have shared over a thousand ideas and projects with us. We're proud to showcase them here.

Find Inspiration from other Max Users

Cycling '74 will review it within a week and may make minor edits before publishing it, so your project looks best and reads well in our project gallery.

Thank you for your submission! Your project is currently pending.

Account Recovery

Bundled

{ name } { version } Release Notes

There was a problem changing your password. Please try again.

You can now <link>log in</link> with your updated credentials.

Your password was changed successfully.

Reset Password

Your purchase has now been linked to this account. Next, start up the Max application and sign into your account (Help > User Account and Licenses).

Retrieve License

Type

Search the Cycling '74 forums and website

Search {query}

Please enter your educational details

Your Max for Live or Live Suite serial number is required for this purchase. <link>Need help finding your serial number?</link>

There was a problem updating your subscription. Please try again, or contact support@cycling74.com if the problem persists.

Confirm Subscription Addon

Thank you for your purchase

Thank you

Retrieving your order details, please wait...

Contact <link>support@cycling74.com</link> if you have questions/issues.

Couldn't sign in. Please check that your username/email and password are correct.

Sign in with your Cycling '74 account

There was a problem creating an account. Please try again.

Successfully created your user account! Please check your email for one last verification step.

Create a Cycling '74 account

Select a Product

Thank you! Your request has been successfully submitted to our support team. Please check your email.

There was an error sending your application. Please try again.

There was an error sending your request. Please try again.

By submitting this iLok request, you understand that you will be notified when an asset is deposited to your iLok.com account. After receiving that notification, you can transfer the asset to your iLok USB stick. Please be aware that all iLok requests are manually processed so it can take up to 48 hours to fulfill your request during normal business hours (Monday-Friday, 9am-5pm Pacific Time).

Important Information

Thank you! Your request has been successfully submitted.

Please note that we are no longer taking submissions for Tools and no longer supporting the Tools section, so you may run into broken files and URLs. You can contribute to the Cycling '74 Community by submitting a Package or using the forums instead.

Max Tools Archive

Edit Tutorial

Tutorials are an ideal way to accomplish a task, learn a new strategy or brush up on your skills. In addition to our in-app Examples, Tutorials and Help Files, you can find new ones here.

Explore the Online Tutorials

Tutorials

Thank you. Please start Max and sign in to use your license

Upgrade

Sign In

Your account requires verification. Please check your inbox, or <link>click here to send the verification email again</link> if you didn't receive it.

Unverified Account

Do you have an activation code?

Already own Max 8 and ready to authorize?

Trouble? Please email <link>support@cycling74.com</link> for help.

If you're new to Max, this is just for you.

Thanks for verifying your account!

You're one step closer to being part of the Cycling '74 Community.

Verify Your Cycling '74 Account

Failed to request a new verification e-mail: {message}

A verification email has been sent to { email }. Please check your inbox.

Can't find your verification e-mail or only have an expired one?

There was a problem verifying your email change. Please try again.

There was an error verifying your email address.

Your email address has been successfully verified. Thank you!

Verify Your Email Address

A user token is required to verify your email address. Please follow the link you received via email.

i have a live.dial mapped and controlled by a hardware encoder.

this live.dial is controlling any assigned parameter set with an id.

to do that i set it with the selected_parameter. (with the mouse)

everything is working fine, the value is set to the live.dial so there are no value jumps on the encoder when changing the id.

but, two things are not working properly:

first. when making fast value changes then the live.dial starts to jitter and dont stop anymore.

i tested with different encoders or even analog pots mapped to the live.dial. same.

second. when im recording in ableton then

both the live.dial and the mapped parameter are recorded to automation.

now, i dont want to have the live.dial recorded to automation.

the live.dial has to be <Visible to Mapping> to be mapped - obviously.

if its set to <Automated and Stored> it is recorded in automation. - dont want.

if i set it to <stored only> or <hidden> then its not mappable anymore.

hi, beginner here.

i have a live.dial mapped and controlled by a hardware encoder.

this live.dial is controlling any assigned parameter...

mapped-livedial-undesired-value-jittering-and-make-it-invisible-to-automation

mapped live.dial undesired value jittering - and make it invisible to automation

Marc Assenmacher

I need to use a [live.observer] to observe a changing string. So far I could only find strings on hidden parameters, which can be observed but won't update.

Is there any way to observe a changing string with [live.observer]?

I need to use a [live.observer] to observe a changing string. So far I could only find strings on hidden parameters, which can be observed...

how-to-observe-a-changing-string-with-liveobserver

How to observe a changing string with [live.observer]?

elisabatti

hello everybody! I have a little problem. I am using fiddle~ to detect the pitch of microphones in ableton. I have created this patch. I have 4 microphones. So I place this .amxd patch in four separate tracks . If I have only one track everything is fine, but then, when I start adding the four tracks, each one with his own pitch detection, fiddle starts behaving erraticaly. ANY HELP???

Trigg.me antenna02.amxd

hello everybody! I have a little problem. I am using fiddle~ to detect the pitch of microphones in ableton. I have created this patch. I hav

fiddle-in-max4-live

fiddle in max4 live

Teru Kobata

I am using the [vst~] object to load the Diva Synthesizer, and I’m trying to retrieve preset names using the pgmnames message. However, when attempting to retrieve certain preset names, such as "BT the master himself(at+mw+pb)", it gets truncated, resulting in an output like "BT the master himse". This issue occurs with several preset names. I suspect there might be a character limit, but the truncation doesn’t seem to happen at a consistent number of characters.

Does anyone know of a solution or workaround for this?

Preset Name Truncation When Sending pgmnames to vst~ in Max for Live

preset-name-truncation-when-sending-pgmnames-to-vst-in-max-for-live

Indigo Olson

Hello. I've been having an issue with a device I've been developing. The device uses the BrowseRouting abstraction to allow a second set of input channels (3+4) whose audio is from one of any tracks in the live set. The issue I've been experiencing is that it is possible to ask, through the umenu object, for the device to pull input audio from its parent track. The audio is routed through the device, processed, routed again, processed again - you get it. The sound is unbearable and certainly a safety hazard. 

I'm here to ask (meekly - I'm only a month into using Max) if there's a way to modify the BrowseRouting abstraction to ignore its parent track when using live.observer to call IDs from the live set.  Or, short of that, if there is a way to guarantee it won't feed back in such a way that could be damaging. 

Willing to share my code if that would help at all, but as of right now my use of the abstraction is very straightforward.

Thank you to anyone who takes the time to help me on this!

Hello. I've been having an issue with a device I've been developing. The device uses the BrowseRouting abstraction to allow a second set of...

browserouting-abstraction-can-link-to-the-parent-track-of-the-device-causes-ear-splitting-feedback

BrowseRouting abstraction can link to the parent track of the device - causes ear-splitting feedback

Mattia Zanzi

Hi there. I'm trying to use a subpatcher from the toolbox AudioRoutings ( https://cycling74.com/articles/audio-routings-a-new-system-for-multi-channel-routing-in-ableton-live ). There is an instance (an object created by that team) which lists all the possible audio tracks in Live. I would like to use that list (therefore that object) for a project of mine. On the object is written that, in order to uset, it is sufficient to copy it into a subpatcher. However, when I do this, some related objects become unusable, and I get written "No such object" in the console. Any possible solution? Thanks!

Hi there. I'm trying to use a subpatcher from the toolbox AudioRoutings ( https://cycling74.com/articles/audio-routings-a-new-system-for-mul

"no-such-object"

"No such object"

KRAWALI

I made a patch that outputs 1 if the playhead is within the loop range and 0 if it is not. It works fine, it's only that when Live is playing back and then leaves the loop range, it takes a bit until the output switches to zero.

My guess is because the patch is constantly checking for every float point number of the playhead position whether it is within the range and during playback that results in a lot of operations.

If Live is not playing back, then the output changes super quick when clicking in/out of the loop range.

Would appreciate some help if someone knows how to get this reacting more quickly :)

Hey,

I made a patch that outputs 1 if the playhead is within the loop range and 0 if it is not. It works fine, it's only that when Live is...

check-whether-playback-is-within-in-loop-range-delayed-output

Check whether Playback is within in Loop Range - Delayed Output

distantnoise

I hope to find some help here. I'm a little bit familiar with Max and I realized some smaller projects (audio effects, basic signal generators, some utility devices). Now, I'm about to learn how to control Live via a M4L device and I run into some difficulties.

My goal: I want to create a floating Max for Live device which mirrors Live's native Echo device (for use under certain live conditions).

I started with the rather easy stuff. I did a replication of the Echo GUI and a patcher with a zoomable floating window. Next step, controlling the Live parameter. With success, I reused some examples to create a bidirectional control (see GIF).

My issue: In my configuration, I need to map the parameter I want to control manually. And the way I catch the device parameter seems pretty convoluted – especially when I start to control 30+ controls (see PNG).

My question: what might be the simplest way to get all the device parameter ID's of a Live device which is on the left from my Max for Live device? (There is a similar example in the Building Max Devices pack, but I can't adapt it for my needs)

Hi there,

I hope to find some help here. I'm a little bit familiar with Max and I realized some smaller projects (audio effects, basic...

what-might-be-the-simplest-way-to-get-all-the-device-parameter-ids-of-a-live-device-which-is-on-the-left-from-a-max-for-live-device

What might be the simplest way to get all the device parameter ID's of a Live device which is on the left from a Max for Live device? 

FRANZ BERNARD

object that is dynamically populated with chord names when I press a key on a MIDI keyboard, and this works fine.

However, I'm facing an issue: the output of the chord name (

) only occurs after I release the key. I need it to output the chord name immediately when I press the key, rather than waiting for the release. Is it possible to get the output at the time of the key press?

It only works well when the contents of the umenu do not change.

Issue with umenu updating when contents change

issue-with-umenu-updating-uhen-contents-change

Paul Piatek

maybe I simply don't understand the puprpose or the usage of the new live.routing object.  When I add the Live Routing Audio In example to my patch, the selected port/channel will always be added into plugin audio channels 1 and 2 - in these channels the normal audio from that track is already present, so the signals just mix up.

Max For Live Forum