This page is only visible to admin users. Sorry!

This page is only visible to signed in users.

Contact <link>support@cycling74.com</link> if you believe you're seeing this page in error.

You don't have permission to view this page.

Activity

Billing History for { name }

Licenses

There was a problem removing the addon. Please try again.

Are you sure you would like to remove the <name>{addonName}</name> addon from your Max subscription? Your {addonName} addon license will remain active until the end of your current billing cycle.

{name} was successfully removed from your Max subscription.

Remove Addon

There was a problem resuming your subscription. Please try again.

Are you sure you would like to resume <name>{addonName}</name>? Your billing cycle will be reactivated and you will be billed as normal on {renewalDate}.

Your subscription has been successfully resumed.

Resume Subscription

There was a problem cancelling your subscription.

Are you sure you would like to cancel <name>{licenseName}</name>? Your license will remain active until <expiry>{expiryDate}</expiry>, at which point your subscription will expire and the license will be deactivated.

Your subscription has been successfully canceled.

Cancel Subscription

Next, start up the Max application and sign into your account (Help > User Account and Licenses).

Max has been successfully activated.

You must be signed into your account to activate Max.

Activate Max

Create a New Post

Edit Article

The list of what we're discovering about Max and our users grows each day. We tackle everything from hardware reviews to re-reading books from decades past.

Get the Latest on Max and our Community

Articles

Sign Out

Sign in to authorize License

Authorize Max

Filter by Format

Filter by Language

Find books related to learning Max.

Books About Max

Here are the artists and educators helping people get creative in Max

Meet Our Max Certified Trainers

Certified Trainers

{ firstName } { lastName } - Certified Trainer

There are no open positions at this time.

Please check your inbox for further instructions.

Forgot Password

Error

Success

Actions

Create Forum Topic

Edit Forum Topic

{category} Forum

There was an error submitting your details. Please try again.

Thank you for your submission! Someone will be in touch with you soon.

NFR / Industry Accomodations

Please make sure you use the link you received by email.

There was a problem retrieving your invitation.

Your account has been successfully created. To manage your institutional licenses, please go to <authLink>https://auth.cycling74.com</authLink> and sign in with your newly created account.

You must be signed out to view this page.

Create an Account

Find more details on our <link>Status Page</link>.

Under Maintenance

We are currently carrying out a scheduled maintenance of our website. Some functionality is temporarily unavailable. We appreciate your patience.

Name

Sort By

{ category } Packages

Share a Max Project

Edit Project

Image Notes

Important Notes

Max Projects come in all shapes and forms. Over the years, our users have shared over a thousand ideas and projects with us. We're proud to showcase them here.

Find Inspiration from other Max Users

Cycling '74 will review it within a week and may make minor edits before publishing it, so your project looks best and reads well in our project gallery.

Thank you for your submission! Your project is currently pending.

Account Recovery

Bundled

{ name } { version } Release Notes

There was a problem changing your password. Please try again.

You can now <link>log in</link> with your updated credentials.

Your password was changed successfully.

Reset Password

Your purchase has now been linked to this account. Next, start up the Max application and sign into your account (Help > User Account and Licenses).

Retrieve License

Type

Search the Cycling '74 forums and website

Search {query}

Please enter your educational details

Your Max for Live or Live Suite serial number is required for this purchase. <link>Need help finding your serial number?</link>

There was a problem updating your subscription. Please try again, or contact support@cycling74.com if the problem persists.

Confirm Subscription Addon

Thank you for your purchase

Thank you

Retrieving your order details, please wait...

Contact <link>support@cycling74.com</link> if you have questions/issues.

Couldn't sign in. Please check that your username/email and password are correct.

Sign in with your Cycling '74 account

There was a problem creating an account. Please try again.

Successfully created your user account! Please check your email for one last verification step.

Create a Cycling '74 account

Select a Product

Thank you! Your request has been successfully submitted to our support team. Please check your email.

There was an error sending your application. Please try again.

There was an error sending your request. Please try again.

By submitting this iLok request, you understand that you will be notified when an asset is deposited to your iLok.com account. After receiving that notification, you can transfer the asset to your iLok USB stick. Please be aware that all iLok requests are manually processed so it can take up to 48 hours to fulfill your request during normal business hours (Monday-Friday, 9am-5pm Pacific Time).

Important Information

Thank you! Your request has been successfully submitted.

Please note that we are no longer taking submissions for Tools and no longer supporting the Tools section, so you may run into broken files and URLs. You can contribute to the Cycling '74 Community by submitting a Package or using the forums instead.

Max Tools Archive

Edit Tutorial

Tutorials are an ideal way to accomplish a task, learn a new strategy or brush up on your skills. In addition to our in-app Examples, Tutorials and Help Files, you can find new ones here.

Explore the Online Tutorials

Tutorials

Thank you. Please start Max and sign in to use your license

Upgrade

Sign In

Your account requires verification. Please check your inbox, or <link>click here to send the verification email again</link> if you didn't receive it.

Unverified Account

Do you have an activation code?

Already own Max 8 and ready to authorize?

Trouble? Please email <link>support@cycling74.com</link> for help.

If you're new to Max, this is just for you.

Thanks for verifying your account!

You're one step closer to being part of the Cycling '74 Community.

Verify Your Cycling '74 Account

Failed to request a new verification e-mail: {message}

A verification email has been sent to { email }. Please check your inbox.

Can't find your verification e-mail or only have an expired one?

There was a problem verifying your email change. Please try again.

There was an error verifying your email address.

Your email address has been successfully verified. Thank you!

Verify Your Email Address

A user token is required to verify your email address. Please follow the link you received via email.

Joachim Budweiser

can someone confirm this? if i build my test-patch (doing nothing except for an fft and its inverse) as recommended in the rnbo-fft-tutorial 

https://rnbo.cycling74.com/learn/using-the-fft

, the sound gets chopped/ring-moddy as if the windowing wasn't in phase. if i export to vst3, it has the same effect. is this a known bug or a windows-issue (win10)?

hi there

can someone confirm this? if i build my test-patch (doing nothing except for an fft and its inverse) as recommended in the...

fft-hann-window-not-working-properly

fft hann window not working properly

Dimitri Bosiers

I'm using the following to find the phase in radians of a sinewave ( but it realy can be anything ) to implement a phase shifting on a signal. 

[ hilbert~ ] (r, i)-> [ expr~ atan2(r, i) + pi ]

At lower frequencies this gives visible phase wrapping in a scope.

However these become very minor the higher the frequency gets.

Visually and by ear ( on a tone ) it seems like it's not worth to spend CPU on unwrapping the phase as RNBO's as the hilbert and atan2 functions seem to be tweaked to work well in the audible spectrum, but is this the case, or is unwrapping advisable ? 

I'm using the following to find the phase in radians of a sinewave ( but it realy can be anything ) to implement a phase shifting on a...

hilbert-transform-atan2-is-phase-unwrapping-needed

Hilbert transform + atan2() is phase unwrapping needed ? 

Peter Nyboer

https://rnbo.cycling74.com/explore/raspberry-pi-oscquery-example

I know I'm able to communicate with my instance on the Raspberry Pi: I can send a parameter to the synth at rnboplay.local:1234 with something like:

and see the slider change in the web interface, and hear the result.

However, when I try to add a listener with 

I would expect parameter data coming out of [udpreceive 8003] when I make changes in the web interface on the instance or when I send a parameter over osc as above.  

Additionally, using the above "add" commands, I'd expect changes in the JSON when I load the URL rnboplay.local:5678/rnbo/listeners/entries but it remains the same before I added any entries.  Similarly, the osc command "/rnbo/listeners/entries" doesn't return any data. 

Any help would be appreciated. It just seems like the listeners aren't working.

raspberry pi oscquery listeners with udpreceive

raspberry-pi-oscquery-listeners-with-udpreceive

I'm running into an issue where it seems both [noise~] and a [gen~] patcher with noise going to out1 both do not produce sound when using Web Export. In my case I've created a very simple synthesizer. It takes in a frequency and a "type" (ie the wave). All other wave types work for example [cycle~] and [tri~] but when I attempt to switch my selector to the noise it goes silent. Oddly my browser still detects audio as playing and I hear a click which leads me to believe its outputting a constant value but I cannot record my desktop audio to confirm this at the moment.

Below is an image of the various setups I attempted. Anyone know whats going on here or maybe some workaround? Any help would be greatly appreciated!

Note: All versions of this patch function properly inside of Max when tested and only fail upon Web Export.

Hello all

I'm running into an issue where it seems both [noise~] and a [gen~] patcher with noise going to out1 both do not produce sound...

no-forms-of-noise-work-in-rnbo-web-export

No forms of noise work in RNBO Web Export?

I'm curious about parameter value smoothing in RNBO. I currently have a rampsmooth~ after every param, as they are largely fed by MIDI, and even mouse interaction can be kind of janky with the parameters with large value spreads. 

It's more of a security blanket though - I'm not sure when it really necessary to smooth a param output or not. I'd rather not find out on a case by case basis since I have 30+ parameters! If smoothing is usually needed on param output to avoid zippers, would it make sense to incorporate an 

@smooth <num sample up> <num samples down>

I'm curious about parameter value smoothing in RNBO. I currently have a rampsmooth~ after every param, as they are largely fed by MIDI, and...

parameter-smoothingpossible-feature-request

Parameter smoothing/possible feature request

toydrones

I'm trying to make a real-time phase vocoder in RNBO like the ones in 

. I'm not out of the woods yet, but I want to share what I have so far and get all the feedback I can.

The first example patch from the tutorial 

 ports with some modifications to compensate for RNBO's lack of framedelta~ and frameaccum~, pictured below:

Note that this is a crude workaround. While it can resynthesize the original signal as cleanly as the tutorial patches, it produces unexpected pitch/formant/phase artifacts when timestretched even a little bit , and these artifacts are notably stronger than those in the tutorial.  I assume they stem from my framedelta~ and frameaccum~ workarounds. I tinkered with this patch for a while to no avail and eventually decided to try the same thing without polar coordinates. 

The tutorial's cartesian PVOC example uses some pink send~ and receive~ pairs in what 

 an infinite loop outside the pfft~ setting:

Sure enough, attempting this scheme in RNBO wouldn't compile at first because of the infinite loop. It managed to compile with a feedback~ thrown in, but the resulting patch only produced harsh clipping. Delaying the feedback loop by fftsize or hopsize created the same clipping, which persisted even with the feedback multiplied by decimals in the 0.1 - 0.4 range. 

I did at least get a cartesian pvoc to cleanly resynthesize the signal, though not without the timestretching artifacts of my other attempt.

If I understand correctly, the pfft~ object delays its processing by some multiple of the fftsize so that it may read and write to a frame simultaneously, which results in its odd/lovely ability to accomodate infinite loops. RNBO, on the other hand, does not perform this automatic buffering, which may or may explain its lack of a framedelta~ and frameaccum~ objects. 

To me, this all suggests a subtlety in RNBO's fft~ handling not mentioned in 

. Could anyone help me better understand RNBO's fft~ object and how I might account for it in my phase vocoder project? Here are the patchers for reference:

I'm trying to make a real-time phase vocoder in RNBO like the ones in The Phase Vocoder – Part I tutorial. I'm not out of the woods yet,...

rnbo-phase-vocoder-troubleshooting

RNBO Phase Vocoder Troubleshooting

Darling Lee

        I've recently become very interested in RNBO, especially its ability to directly compile into plugins such as VST3, as well as export C++ source code for custom UI using JUCE to create my own plugins. However, I've encountered some issues and would like to ask for advice:

Hello!

        I've recently become very interested in RNBO, especially its ability to directly compile into plugins such as VST3, as well...

some-questions-about-rnbo-exporting-and-compilation

Some Questions about RNBO Exporting and Compilation

BenCello

Even if this may seem like old history, I could track a change in the behaviour of RNBO with Params/Attributes from 1.2.4. to 1.2.5 versions of RNBO.

When you try to change the value of a [param] of RNBO that is also tracked by a [getattr] on the RNBO object, starting from version 1.2.5, the value is not updated anymore!

This is a behaviour that miss very much... If you have any info on how to make it work with versions >1.2.4 of RNBO, I am interested.

Hello !
Even if this may seem like old history, I could track a change in the behaviour of RNBO with Params/Attributes from 1.2.4. to 1.2.5...

get-value-from-attribute-outside-rnbo

Get value from attribute outside RNBO

Johann

After some succeful exports of a RNBO patch to a Raspberry Pi I now get this message during export:

Back in the target list under "Devices" where previously I could select the Raspberry Pi as a target device there is now "No devices connected". But the Rapsberry Pi is connected via cat6 cable to my PC and is still accessible via SSH.

It seems like, this behaviour started after I was adjusting the buffersize of the PiSound from 256 samples down to 32 samples. When I tryied to export with 32 samples I got this error:

After that I tried setting it back to 256 samples but always get the first mentioned message

After some succeful exports of a RNBO patch to a Raspberry Pi I now get this message during export:

Back in the target list under...

RNBO Forum